CM4600 Concrete Curb Machine
Badger Curb Maker
Designed to seamlessly shape and finish curbs after another product screeds flatwork, this innovative machine supports user efficiency and reduces the need for extra equipment, transportation and labor. The Badger Curb Maker is battery-powered and lightweight, and delivers high-quality, uniform results for concrete pours.
Compatible Products
Stock Drum Profiles
Our stock drum profiles match an array of common specs. Use the filter to find Curb Maker compatible options.
Curb Tools
Our curb tools help with finishing your curb profile. Tools are made to match our stock drums, but custom is also available.
Specifications
Battery Power
Adjustable Guide Rings
One-Push Directional Change
Interchangeable Drums
Right or Left Hand Speed Control
Steel Protective Housing
Features
• Note: capable of shaping curb head only, up to 6” height and 18” width.
• Easily switches between any of our Badger Curb Maker drum profiles.
• Variable speed lever and directional button which give the operator ultimate control of the machine.
• 3-position adjustable handle provides a more comfortable offset.
• Curb Tools available to assist finishing.
Troubleshooting & FAQ
What do I do if the Curb Maker drum does not spin?
-
- Check the battery by pressing the indicator button
- Check the pin that connects the drum shaft to the drive chuck
- Check trigger and linkage for bent parts or concrete build up.
- Remove battery and reinsert.
- Check directional button and make sure it is pressed all the way in.
The Curb Maker is hard to pull
-
- The Curb Maker comes with an operator’s belt. This belt reduces the difficulty of pulling the machine.
- Concrete may be too dry or a difficult mix to screed. See the ideal mix information in the product manual.
The Curb Maker will not stay on the forms
- Verify that all stakes and pins are below the top of the form.
- Check the amount of concrete in front of the machine.
- Make sure there is no more than two inches of excess.
Why won’t the battery access door stay shut?
If the door isn’t staying shut, check and if need be tighten door bolt.
What are the drums made out of?
Can I pour just one curb shape with the Curb Maker?
The Curb Maker can be purchased with any of our stocked drum styles or a custom fabrication for specific jobs.
What is the power source of the Badger Curb Maker?
The Curb Maker runs off of one DeWalt FLEXVOLT battery. One battery should power the Curb Maker to pour 150-200 linear feet of curb.
Can I use the Curb Maker for catch or spill curb?
A standard Curb Maker drum can be used to pour catch or spill curb with the heights being adjusted by the operator.
How do I change the direction of the Curb Maker?
The direction of the drum is changed with the directional button on the drill. When switching directions, you must also swap the drum sweep to the other side. The drum sweep should always be on the top side of the drum.
How do I adjust the speed of the Curb Maker?
The speed is adjusted the same as most cordless power tools- by how much you squeeze the trigger. If the trigger is squeezed to the fullest extent, the drum will go full speed. If the trigger is barely squeezed, the drum will move slowly.
Can I change the drum profile on a Curb Maker?
The Curb Maker is designed to easily adapt between different curb profiles by changing the drums attached to the main frame.
Can the Curb Maker power curb and gutter drums?
No. The Curb Maker is designed for curb only drums.
Does Curb Roller Mfg warranty the Badger Curb Maker?
We do! Currently we offer a 1 year warranty on the Badger Curb Maker CM46000 to the original purchaser.
We are located outside of the United States and Canada. Can we still buy your machines?
Of course! We have many happy customers outside of the United States and Canada. We just ask that you contact our international dealer J.D. Honigberg to set up your order. More information can be found here.
Features & specifications are subject to change without notice.