HP1300 Hydraulic Power Source

Hydra-Pack

Due to the ease of portability, the HP1300 is perfect for those job sites where your skid loader or mini excavator won’t fit. This heavy duty power unit delivers an impressive two way directional flow of 5-8 GPM with adjustable PSI and a max PSI of 2300.

Estimate My Cost

Hydra-Pack HP1300 from Curb Roller Manufacturing

Download Product Brochure | Download Product Manual | Find A Dealer | Get Financing

Compatible Machines

Curb Roller CM4000 & CM4100

The Hydra-Pack is perfectly portable for the Curb Roller hydraulic curb rolling machine.

Hydra-Screed

Skip the skidsteer by powering your Hydra-Screed hydraulic roller screed with the Hydra-Pack.

Other Hydraulic Tools*

* Check product flow/PSI compatibility before using with non-Curb Roller Mfg hydraulic run products.

Specifications



Gas Power



11 Gallon Tank



13″ Puncture-Proof Tube Tires



Two Way Directional Flow



3 Position Detent Valve



Adjustable PSI (max of 2300)

Features

• Hydraulic Reservoir Capacity: 11 gal. (41.6 l)

• Hydraulic Flow*: 7 gpm (26.5 lpm)

• Maximum Hydraulic Pressure: 2300 psi (158.6 bar)

• Oil Filtration: 10 Micron

• Two-way directional flow of 5-8 GPM.

• Adjustable PSI with a max PSI of 2300.

• Powerful 13 horse Honda GX390 gas engine.

• Easily fits in the back of a pickup or job trailer.

• Runs the Curb Roller CM4000 and Hydra-Screed HS3000.

* Dependent on engine RPM

IMPORTANT: Check product flow/PSI compatibility before using with non-Curb Roller Mfg hydraulic run products.

Troubleshooting & FAQ

How often should I change the hydraulic oil filter?

The hydraulic oil filter should be changed every 300 hours. Here’s how:

1. Stop engine.

2. Place a drain pan under filter.

3. Remove and replace filter.

4. Refill hydraulic oil reservoir to proper level.

5. Dispose of oil in an environmentally safe manner.

How often should I change the hydraulic oil?

Change hydraulic oil every 600 hours/annually. Here’s how:

1. Stop engine.

2. Place a drain pan under suction strainer.

3. Remove hose (J) to drain oil.

4. Remove, inspect, and clean suction strainer (K). Replace suction strainer if damaged.

5. Install suction strainer (K) and connect hose (J).

6. Refill hydraulic oil reservoir to proper level.

7. Dispose of oil in an environmentally safe manner.

Where should the Hydra-Pack be used?

Due to the ease of portability, the HP1300 is perfect for those job sites where your skid loader or mini excavator won’t fit. An 11-gallon tank provides plenty of hydraulic fluid and cooling capacity, and the 13” pneumatic tires let you navigate through the rough terrain of any job site.

What can the Hydra-Pack be used for?

A powerful 13 horse Honda GX390 gas engine easily runs our Curb Roller CM4000 and Hydra-Screed HS3000 systems, as well as hydraulic saws, jack hammers, and other hydraulic tools. At the size of a standard generator, the Hydra-Pack HP1300 easily fits in the back of your pickup or job trailer.

How heavy is the Hydra-Pack?

The Hydra-Pack weighs about 300 lbs before gas is added to the engine fuel tank.

What is the hydraulic reservoir capacity?

The hydraulic reservoir capacity is 11 gallons (41.6 l).

What is the hydraulic flow?

The hydraulic flow is 7 gpm (26.5 lpm) dependent on engine RPM.

What is the maximum hydraulic pressure?

The maximum hydraulic pressure for the Hydra-Pack is 2300 psi (158.6 bar).

Does Curb Roller Mfg warranty their equipment?

We proudly offer a 3 year warranty on the Hydra-Pack HP1300.

We are located outside of the United States and Canada. Can we still buy your machines?

Of course! We have many happy customers outside of the United States and Canada. We just ask that you contact our international dealer J.D. Honigberg to set up your order. More information can be found here.

Features & specifications are subject to change without notice.